Special funds for the development of new energy industry 2016 fourth support

Polaris solar PV net news: recently, the reporter was informed from the Shenzhen municipal development and Reform Commission website, Shenzhen City, Shenzhen issued on the Organization and implementation of new energy industry development fund 2016 fourth support program notifications, notification requirements solar power as the key support areas, focus on the development of thin-film solar cells and high efficiency crystalline silicon solar cells and modules, the new solar panels, photovoltaic, solar glass, solar thermal utilization, Building integrated photovoltaic (BIPV) solar-LED opto-electronic products.

Following is the full text:

All relevant units:

In order to push new energy industry development, I decided to organize the implementation of new energy industry development fund 2016 fourth support program and related matters are hereby notified as follows:

, Key support areas

The smart grid. Key transmission line State detection devices and systems, soft AC and DC power transmission key equipments, high voltage direct current transmission key equipments, intelligent power distribution equipment and systems, smart appliances and systems, smart grid communication and information platform.

Solar energy. Focus on the development of thin-film solar cells and high efficiency crystalline silicon solar cells and modules, the new solar panels, photovoltaic, solar glass, solar heat, solar building integrated photovoltaics (BIPV) and solar-LED and optical products.

Nuclear energy. Supporting key nuclear power equipment manufacturing, information technology, nuclear power plant construction and operation of integrated systems and nuclear supply chain services platform.

Wind power. Focus on the development of wind turbine control equipment, wind power equipment and new wind turbine equipment manufacturing.

Biomass energy. Focus on the development of waste incineration power generation, waste incinerator exhaust and flue gas treatment equipment and other bio-fuels.

Energy storage power station. Focus on developing energy storage material, storage equipment, construction and application of energy storage power station (technical).

New-energy cars. Focus on developing hybrid cars, electric vehicles, batteries and key components, and so on.

Shale gas. Focus on the development of shale gas resources exploration, mining technology and equipment.

Second, focus on supporting specific

(A) high-tech industrialization project supports special (equity financing)

(B) project supporting high-tech industrialization project (loan)

(C) the municipal engineering laboratory set up to support special (DSS)

(D) special municipal engineering laboratories enhance support (DSS)

(E) innovative capacity-building project (DSS)

Third, specific reporting requirements

(A) project application unit should be in accordance with the relevant support programs guide to declaration requirements, preparation of project funding application (or write your own entrusted to qualified advisory bodies), fill in the relevant forms, and get business licenses, corporate code certificate, and other related accessories. Applications for project funds cover should be made to declare special category for project support, project name, project, project, project leader in the field and contact information (phone, fax).

(B) of the same project or the construction to the municipal authorities repeated the same project may not be declared, long to apply for funding. Once discovered, will cancel the Declaration eligibility of related enterprises.

(C) the project name to appropriate specifications and can accurately reflect the content project.

(D) reporting project to complete the project approval, approval or for the record, and energy-saving evaluation file reviewed by the authorities through.

(E) reporting projects have been implemented in project construction fund, planning and site selection, construction sites, environmental assessment, and other related conditions.

(Vi) operating income and other operating metrics of the projects submitted, should be aligned with data submitted to the municipal Statistics Department, designated by the municipal Statistics Department outside of the normal margin of error, will cancel the project Declaration eligibility; many times outside the normal range, is listed as “not good faith enterprise”, not declare special in three years.

(G) project application unit should sign in Shenzhen Special fill in relevant information online application system for the development of strategic emerging industries, and online reporting system Web site at http://203.91.46.81:8012. Completed online declared Hou, needed through the system print Shenzhen new energy industry special declared project and the project units basic situation table, and project funds application report and the related annex, and will above material rubber loaded book, edit directory, mark page (paper quality text a type 7 copies, stamped units seal, while to CD form attached electronic text a type 2 copies) submitted to I Board receiving window (public Center b district a floor administrative service Hall 3-4,).

(VIII) I never authorized any units or individuals for project construction agency, funding for new energy industries, I plan to declare, project construction unit independent reporting. I will be in strict accordance with the relevant standards and procedures for accepting new applications for funding support programs for energy industries, does not charge any fees. If there is any agency or individuals under the guise I charge fees to businesses on behalf of the Committee, informed that reports to me.

Four, reporting time, and telephone

(A) online application time: between November 30, 2016 and November 7, 2016 on 18:00;

(B) the desk hours: November 8, 2016, December 1, 2016 17:30.

(C) telephone: 88101261 Wu Jing 88128035 Wenceslao Padilla

Notice is hereby given that.

Accessories: special funds for the development of new energy industry 2016 fourth support program

Shenzhen City development and Reform Commission

The November 1, 2016

Annex:

Special funds for the development of new energy industry 2016 fourth support program

A, requirements

(A) project declared units completed project online declared Hou, needed through system print project funds application report, and schedule (Shenzhen new energy industry special declared project and the project units basic situation table,), and will the project funds application report, and corresponding annex and schedule rubber loaded book (stamped units seal, with A4 paper are opposite print/copy, non-blank page needed continuous prepared page, Seven copies) as well as electronic text of these materials (compact disc) submitted to the municipal development and Reform Commission in-window (Center b, 3-4 district administration service Hall on the first floor).

(B) applications for project funds cover shall indicate the category of application projects support program, project name, project, project, project leader in the field and contact information (phone, fax).

(C) the project name to appropriate norms involving industry span should be realistic, to be able to accurately reflect the project content or highlight items on the technical direction and course and other features.

(D) the project expressions of interest or commitment of capital and loans, bank credit, loans and contract amount shall be equal to or greater than the total investment of the project.

Second, special funds for the development of new energy industry 2016 fourth support program guide to Declaration

Directory

1, high-tech industrialization projects support project (equity financing)

2, high-tech industrialization projects support project (loan)

3, municipal engineering and laboratory set up to support special (DSS)

4, special municipal engineering laboratories enhance support (DSS)

5, innovation capacity-building project (DSS)

1, high-tech industrialization projects support project (equity financing)

, Support area

Key energy storage power station, solar, nuclear, wind, biomass, shale gas, new energy vehicles and smart grid new industrialization projects in the energy sector, including key parts and components, materials, control systems, etc.

Second, the support and the amount

Equity investment to support eligible enterprises. Introduction of socio-professional equity investors as partners, the proposed investment enterprises ‘ equity valuation, shareholder negotiations, determine the share price, and so on. Funds in accordance with the “same unit price, willingness to share” approach and cooperation institutions to be investment companies to invest. Judge equity fund project exit timing by cooperation. After the exit time, cooperation in equity investment consultation institutions and project units proposed exit plan, funds and cooperation institutions investment funds at the same time to exit.

Financial aid funds into equity investment funds and direct funding of two parts, total up to more than 30 million Yuan. Among them, the Government funding in principle for cooperation agency equity investment funds 50%, maximum of 15 million Yuan. Direct funding under third party rating agencies on comprehensive assessment to determine evaluation results through direct grants to fund approved by the assessment of projects with a total investment of 20% to determine, and do not exceed the amount Government equity investment; adopted by the evaluation result is not, not by direct subsidy.

Third, the declaration procedure

Equity financing methods of reporting process includes: project collection and material compliance audits, project, road show and equity valuations, review opinions issued by the accrediting bodies, municipalities audited and so on. Project on equity investment agreement contract is divided into the following two categories:

Has signed equity investment agreement project: ① project units according to notification requirements submitted funds application report, city NDRC on declared material for collection rules sex audit; II business competent at room while delegate financial equity generation holding institutions (Shenzhen City far to investment limited, following referred to “generation holding institutions”) and third party assessment institutions further audit, generation holding institutions on investment contract or agreement effectiveness and equity investment institutions qualification of audit, third party assessment institutions Organization experts review and site study ③ held institution and third party inspection agency project review report submitted to the municipal development and Reform Commission, municipal development and Reform Commission completed the follow-up examination and approval procedures about municipal development and Reform Commission to prepare support plans, drew attention to the approval of the municipal government.

Not signed equity investment agreement project: ① project units according to notification requirements submitted funds application report, city NDRC on declared material for collection rules sex audit; II business competent at room delegate generation holding institutions Organization project declared units and cooperation equity investment institutions carried out project road played, by declared units explained project content, cooperation equity investment institutions heard reported and on has investment value of enterprise carried out due diligence survey, and equity valuation, and shares negotiations, work (signed equity investment agreement Hou into Xia a link) ; ③ generation holding institutions and third party assessment institutions further audit, generation holding institutions on investment contract or agreement effectiveness and equity investment institutions qualification of audit, third party assessment institutions Organization experts review and site study; II generation holding institutions and third party review institutions issued project review report reported city NDRC, city NDRC completed follow-up approval procedures; ⑤ city NDRC prepared support plans, drew attention to the municipal government validation.

Four, declare conditions

(A) the project applicant is in Shenzhen (Shenzhen-Shantou special zone) registration, have independent legal personality of the new energy and industrial development, production and service enterprises.

(B) the project meets the new energy industry development planning and policy areas of clear support, in Shenzhen (Shenzhen-Shantou special zone).

(C) the project using its own technology (including intellectual property rights, digestion and absorption of innovation, both at home and abroad to jointly develop the technology, and so on) should be advanced and well worth, outcome identification, issued by the authorities of the relevant certification, technical inspection reports and other documents or related certification and licensing.

(D) the project has a strong technology development, financing, project implementation capacity, and better credit ratings, within a reasonable range of asset-liability ratio management in good condition, with related conditions of industrial production, operation and implementation of the project.

(E) the project conforms to national industrial policies and energy-efficient, energy, environmental protection, safety requirements, project plan feasible, has good social and economic benefits.

(F) project has been completed in accordance with the relevant provisions and approval, filing or approval of, and time limits for more than two years, according to the project needs to be made, such as land use, environmental impact assessment, planning documents of ratification.

(VII) construction period of less than 3 years.

Documents for applying for five,

(A) application form

Declaration for the new energy industries projects and project basic information form (online after completing the print seal)

(B) the project application report (need to edit directory, pagination)

Reports should be written in the following format:

1. project summary (maximum 3000 words)

Include the project name, corporate profiles, construction site, construction, building size, construction, technology infrastructure, routes, and operation mode of projects, project implementation conditions, total investment in and financing of the project, total government assistance funding (set out apply for equity funding and direct funding lines), the economic and social benefits of the project.

2. background and significance of projects

Including domestic and foreign industry and technology trends, key links and technical difficulties of the industry chain, role and impact of the project on industrial development, degree of Association analysis, and market analysis.

3. the basic situation of project application unit

Including enterprise ownership nature, and scale, and development planning and the strategy, and row industry of status, and main business and the main products market share, and near three years business performance (total assets, and main business income, and profit total, and net profit, and tax situation, and development input, and assets liabilities rate, and bank credit grade,), and project head and the main shareholders profile, and has has of professional qualification situation and the in recent years main results,, established time insufficient three years of project bear units provides units established yilai of related profile.

4. Technology Foundation

Including the research and development team, source and intellectual property rights, has done years of research and development and pilot cases and identification, technical or technological characteristics and the existing technology or process, the advantages of, this technology breakthrough technological advances of the industry’s importance and role.

5. project construction plan

Including the main contents of the project, building size, building sites, the use of the route and technical characteristics, the project and the main equipment type selection and main economic technical specifications, tendering, construction period of the project and schedule, construction management and project organizational structure and allocation of human resources and so on.

6. conditions of the construction implementation

Include environmental protection and comprehensive utilization of resources, energy-saving measures, the supply of raw materials, safety, sanitation and epidemic prevention, fire and external support conditions for implementation etc; energy chapter fixed assets investment project in accordance with the energy-saving evaluation and review of interim measures (national development and Reform Commission in 2010 6th order) requires preparation.

7. investment and financing

Including, construction investment projects with a total investment estimated table estimates, annual investment plans, project financing and implementation and funding programmes.

Total investment of the project includes the construction and Initial working capital investment, research and development costs. Construction investment including equipment and hardware and software acquisition, installation, construction and other construction of fixed assets investment, and so on. Research and development expenses mainly include commissioned independent research and development costs and development costs. Which, independent development costs main including material fee, and test laboratory processing fee, and travel, and Conference fee, and international cooperation and Exchange fee, and published/literature/information spread/intellectual property fee, and labour, and experts advisory fee, and development personnel fee (not including financial dependent personnel of wage sex spending) and the indirect costs; delegate development costs main is refers to project units delegate outside units for research development by paid of costs. Initial working capital mainly includes fuel, raw material costs, rent lease, etc.

Project funding programmes, project construction investment of not less than a total investment of 40%, total research and development costs and Initial working capital does not exceed 60%; project financing schemes, enterprises ‘ own funds, expected equity investment funds (including financial investment), and not less than the total investment of bank loans.

Funding proposal is subject lists project required the acquisition of major equipment, technology and software list (type and quantity of equipment, reference price, whether purchased, whether the use of direct fiscal subsidy funds, and so on) as well as civil, liquidity, and so on.

8. project financial evaluation, economic benefit and social benefit

Includes inner yield, investment yield, investment return period, the loan repayment period is measured and assessed, projects after the completion of the operation and management mode, output and profits, new jobs, economic and social analysis.

9. project risk analysis

Including technical risk, market risk, financial risk evaluation and risk control.

10. financial report attachment (attachment directory listing you want, order binding when in book form in accordance with the following binding, pagination, includes original marked “original”)

(1) the project legal registration, organization code certificate;

(2) the filing or approval of investment projects as well as energy-saving review (filing) views (in the construction area of the project development and reform Bureau, time limits for more than two years);

(3) project document of planning permission and land ownership certificate, renting space, please provide proof of rental;

(4) environmental impact assessment approval documents issued by the Environmental Protection Department;

(5) units in the last three years of the project financial audit report (if the project unit was established for less than three years, the financial audit report must provide the unit since its establishment);

(6) Bank (within three months) of their own funds on the deposit document (1 original); Bank loan commitment document issued or signed loan agreements or contracts (loans), issued by the investment arm of the investment agreement or a copy of the contract (if there are any venture capital);

(7) the tax records of the previous year;

(8) the sources of technology and technical advancement of the supporting documents necessary production, licensing and certification;

(9) the reporting schedule of projects bidding in government subsidies (for details of the planned third);

(10) construction management commitment letter (format details of the planned fourth);

(11) the project has instrumentation equipment detailed list (format details of the planned fifth);

(12) list of new equipment/software purchase (for details of the planned sixth);

(13) the applicant declared independent reporting and responsible for the authenticity of the submitted materials;

(14) the tax credit certificate issued by the tax authorities;

(15) quality system certification;

(16) annual return on research and development costs, and illustrative material attached to research and development activities;

(17) issued by a qualified third party new energy related product inspection certificate;

(18) other required materials.

In these materials, (1)-(13) must submit materials, and other submitted material can be supplemented according to the actual situation. These copies must be stamped with the company seal and checking the original, confidential material please indicate.

(C) subparagraphs (a), (b) the declarations of full electronic version (CD).

2, high-tech industrialization projects support project (loan)

, Support area

Key energy storage power station, solar, nuclear, wind, biomass, shale gas, new energy vehicles and smart grid new industrialization projects in the energy sector, including key parts and components, materials, control systems, etc.

Second, the support and the amount

Using the loan to support eligible enterprises. Financial resources on individual items of the loan period, in principle not more than 3 years, finds that the lending rate for loans contract loan interest rates, 70% of the total discount amount for the mortgage interest, up to 15 million Yuan.

Third, the declaration procedure

Loan reporting process including: call for projects and material compliance audits, review opinions issued by the accrediting bodies, municipalities audited and so on. Projects by signing the loan contract is divided into the following two categories:

Has signed loan contract project: ① project units according to notification requirements submitted funds application report, city NDRC on declared material for collection rules sex audit (loan contract content should at least including loan amount, and loan term, loan interest rate, has loan funds all for by declared of project of description); II third party review institutions on project declared material integrity, and technology advanced, and investment constitute collection rules sex and loan contract effectiveness for audit, issued project summary report, reported city NDRC; ③ city NDRC prepared support plans And drew attention to the approval of the municipal government.

Temporarily not signed loan contract project: ① project units according to notification requirements submitted funds application report, city NDRC on declared material for collection rules sex audit; II third party review institutions Organization project promotion will, by declared units for company situation introduction and project content explained, Bank representative heard reported, on project units whether has loan conditions for evaluation; ③ Bank on project units for loan audit, and signed loan contract (contract content should at least including loan amount, and loan term, loan interest rate, All loan funds indicated in the contract for the items you declare) about project audit reports issued by third party accreditation agency, reported to the municipal development and Reform Commission, municipal development and Reform Commission completed the follow-up examination and approval procedures; II municipal development and Reform Commission to prepare support plans, drew attention to the approval of the municipal government.

Four, declare conditions

(A) the project applicant is in Shenzhen (Shenzhen-Shantou special zone) registration, have independent legal personality of the new energy and industrial development, production and service enterprises.

(B) the project meets the new energy industry development planning and policy areas of clear support, in Shenzhen (Shenzhen-Shantou special zone).

(C) the project using its own technology (including intellectual property rights, digestion and absorption of innovation, both at home and abroad to jointly develop the technology, and so on) should be advanced and well worth, outcome identification, issued by the authorities of the relevant certification, technical inspection reports and other documents or related certification and licensing.

(D) the project has a strong technology development, financing, project implementation capacity, and better credit ratings, within a reasonable range of asset-liability ratio management in good condition, with related conditions of industrial production, operation and implementation of the project.

(E) the project conforms to national industrial policies and energy-efficient, energy, environmental protection, safety requirements, project plan feasible, has good social and economic benefits.

(F) project has been completed in accordance with the relevant provisions and approval, filing or approval of, and time limits for more than two years, according to the required project approval documents such as land use, environmental impact assessment, planning, basic terms have started construction or have started construction, construction period is generally not more than 3 years.

(G) project funding, has its own proof of funds, Bank loan commitments issued by a financial institution (own funds + ≥ commitment + Bank loan projects with a total investment of bank loans), which own capital not less than 30% projects with a total investment of bank loans over 20 million Yuan.

Documents for applying for five,

(A) application form

Declaration for the new energy industries projects and project basic information form (online after completing the print seal)

(B) the project application report (need to edit directory, pagination)

Reports should be written in the following format:

1. project summary (maximum 3000 words)

Include the project name, corporate profiles, construction site, construction, building size, construction, technology infrastructure, routes, and operation mode of projects, project implementation conditions, total investment in and financing of the project, total government assistance, funding, projects, such as economic and social benefits.

2. background and significance

Including domestic and foreign industry and technology trends, key links and technical difficulties of the industry chain, role and impact of the project on industrial development, degree of Association analysis, and market analysis.

3. the basic situation of project application unit

Including enterprise ownership nature, and scale, and development planning and the strategy, and row industry of status, and main business and the main products market share, and near three years business performance (total assets, and main business income, and profit total, and net profit, and tax situation, and development input, and assets liabilities rate, and bank credit grade,), and project head and the main shareholders profile, and has through of about enterprise quality system certification, and Bank funding letter situation and the in recent years main research,. Set up time is less than three years, the project undertaker provides overview of the unit since its establishment.

4. Technology Foundation

Including the research and development team, source and intellectual property rights, has done years of research and development and pilot cases and identification, technical or technological characteristics and the existing technology or process, the advantages of, this technology breakthrough technological advances of the industry’s importance and role.

5. project construction plan

Including the main contents of the project, building size, building sites, the use of the route and technical characteristics, the project and the main equipment type selection and main economic technical specifications, tendering, construction period of the project and schedule, construction management and project organizational structure and allocation of human resources and so on.

6. conditions of the construction implementation

Include environmental protection and comprehensive utilization of resources, energy-saving measures, the supply of raw materials, safety, sanitation and epidemic prevention, fire and external support conditions for implementation etc; energy chapter fixed assets investment project in accordance with the energy-saving evaluation and review of interim measures (national development and Reform Commission in 2010 6th order) requires preparation.

7. investment and financing

Including, construction investment projects with a total investment estimated table estimates, annual investment plans, project financing and implementation and funding programmes.

Total investment of the project includes the construction and Initial working capital investment, research and development costs. Construction investment including equipment and hardware and software acquisition, installation, construction and other construction of fixed assets investment, and so on. Research and development expenses mainly include commissioned independent research and development costs and development costs. Which, independent development costs main including material fee, and test laboratory processing fee, and travel, and Conference fee, and international cooperation and Exchange fee, and published/literature/information spread/intellectual property fee, and labour, and experts advisory fee, and development personnel fee (not including financial dependent personnel of wage sex spending) and the indirect costs; delegate development costs main is refers to project units delegate outside units for research development by paid of costs. Initial working capital mainly includes fuel, raw material costs, rent lease, etc.

Project funding programmes, project construction investment of not less than a total investment of 40%, total research and development costs and Initial working capital does not exceed 60%; project financing schemes, including its own funds and bank loans, own funds of not less than 30% of the total investment of the project, and you must provide proof of bank documents.

Funding proposal is subject lists project required the acquisition of major equipment, technology and software list (type and quantity of equipment, reference price, whether purchased, whether the use of direct fiscal subsidy funds, and so on) as well as civil, liquidity, and so on.

8. project financial evaluation, economic benefit and social benefit

Includes inner yield, investment yield, investment return period, the loan repayment period is measured and assessed, projects after the completion of the operation, management, production output and profits, new jobs, and so on.

9. project risk analysis

Including technical risk, market risk, financial risk evaluation and risk control.

10. financial report attachment (attachment directory listing you want, pagination)

(1) the project legal registration, organization code certificate;

(2) the filing or approval of investment projects as well as energy-saving review (filing) views (in the construction area of the project development and reform Bureau, time limits for more than two years);

(3) project document of planning permission and land ownership certificate, renting space, please provide proof of rental;

(4) environmental impact assessment approval documents issued by the Environmental Protection Department;

(5) units in the last three years of the project financial audit report (if the project unit was established for less than three years, the financial audit report must provide the unit since its establishment);

(6) Bank (within three months) of their own funds on the deposit document (1 original). If the project has been signed with the Bank loan contract for this project, please provide the contract documents, which should include the use of the loan amount, term and interest rate,;

(7) the tax records of the previous year;

(8) the sources of technology and technical advancement of the supporting documents necessary production, licensing and certification;

(9) the reporting schedule of projects bidding in government subsidies (for details of the planned third);

(10) construction management commitment letter (format details of the planned fourth);

(11) the project has instrumentation equipment detailed list (format details of the planned fifth);

(12) list of new equipment/software purchase (for details of the planned sixth);

(13) the applicant declared independent reporting and responsible for the authenticity of the submitted materials;

(14) the tax credit certificate issued by the tax authorities;

(15) quality system certification;

(16) annual return on research and development costs, and illustrative material attached to research and development activities;

(17) issued by a qualified third party new energy related product inspection certificate;

(18) other required materials.

In these materials, (1)-(13) must submit materials, and other submitted material can be supplemented according to the actual situation. These copies must be stamped with the company seal and checking the original, confidential material please indicate.

(C) subparagraphs (a), (b) the declarations of full electronic version (CD).

3, municipal engineering and laboratory set up to support special (DSS)

, Support areas and main tasks

(A) the key support areas

1. the new generation of intelligent substation protection technology engineering laboratory

Research unprotected installation of protective device sizes and Terminal mode, optimize the structure. Around the switch field installed locally to the natural environment, electromagnetic environment effects on relay protection and proposes targeted anti-jamming and shielding. Continued to improve in-place protection of hardware reliability. Meet the new generation of intelligent substation unprotected installation of relay protection in place, development, design, engineering, validation, and testing requirements.

2. decentralized tracking concentrated photovoltaic inverter technology engineering laboratory

For traditional concentrated type PV inverse variable system maximum power points track (MPPT) number less, and efficiency low problem, carried out dispersed track and concentrated inverse variable PV system of new SIC semiconductor drive technology, and Confluence box MPPT track technology, and thermal technology, and parallel technology and multiple dispersed type track Confluence box and power inverse variable device match control technology of research and engineering of test, achieved more MPPT dispersed track and concentrated inverse variable of PV grid technology programme major breakthrough, Implementation of large-scale photovoltaic power generation efficiency of 2%-3%.

3. Equalization technology research and engineering laboratory

Decay too quickly, utilization, reduce battery life issues, combined with battery charge and discharge management, battery charge estimation, unit voltage balance in the battery pack and battery health status, data precision technology, balance checking and measuring lines, software algorithms and other research and analysis, design modules for proprietary software, engineering trials and reliability, intelligent rapid charging, high current, secure, and efficient.

4. the automotive fuel cell stack engineering laboratory

Fuel cell stack technology performance, high cost and short life problems cannot yet meet the basic requirement for the commercialization of fuel cell vehicles. For these problem, established car with fuel battery electric Heap technology development innovation platform, support fuel battery electric Heap key material of development, and fuel battery electric Heap internal physical and chemical process mechanism of exploration, and across scale stereo integrated simulation simulation means of established, and fuel battery electric Heap design method of established, and performance test and the diagnosis method of research and life and performance attenuation mechanism of research,, upgrade I city car with fuel battery electric Heap technology development and industrialization level.

5. big city bus in control system of hydrogen fuel cell engineering laboratory

Built in the large city bus hydrogen fuel battery control system simulation research environment, development hydrogen fuel battery car with for hydrogen device, and air supply device, and cooling device, and power transform device and energy management device; development fuel battery system total controller, and for hydrogen data acquisition drive module, control system key parts; development, and optimization control system software; advance control system environment security guarantees equipment research; built control system integrated assessment system and assessment standard system.

6. Special flexible silicon technology for new energy vehicle engineering laboratory

Focus on flexible sheets for private power generation technology of new energy vehicles, substrate sheet aluminum, high transmittance of ethylene-vinyl acetate copolymer and thermoplastic elastomer resin, thicker copper belt, multi and 35 6 sections special studies such as compound semiconductors. Development of flexible intelligent Assembly process parameters of crystalline silicon solar panels, flexible amorphous silicon conversion efficiency of 26%.

(B) the main task of

Core technology research of new energy industries and key technique of research, major equipment and key parts of the prototype development and industrialization of high-tech industry technology development, as well as research and industry technical standards, cultivate engineering innovative talents, promoting the application of major scientific and technological achievements, provide technical services for the industry.

Second, the support amount, method, amount and approval process

(A) number of support: there are quantitative restrictions, subject to special funds for the development of new energy industry annual total control.

(B) support: project funding project unit raised in principle, direct subsidies to support the Government. Grant funds to build 50% of the percentage of not less than the amount invested, for research and development costs less than 50%, and may not be used for other expenses.

(C) the amount of support: projects approved by the accredited a certain proportion of the total investment, financial support, not more than 5 million Yuan.

(D) the approval process: publishing guidelines-voluntary reporting-compliance review-peer-review-site visit-Department audited public-municipal government-issue plan.

Three, declare conditions

(A) the applicant shall comply with the following conditions:

1. in Shenzhen (Shenzhen-Shantou zone) registered, with an independent legal personality of new energy industry development, production and service enterprises, institutions, social organizations and private non-enterprise organizations. Among them, the enterprise should have a strong technical development and project implementation capacity, and management is in good condition, with strong economic strength and better economic benefits; public institutions, social groups and private non-enterprise should possess excellent technical and management team, has a high level of research and development results and technical reserves, with a good cooperative basis, and sound financial system. Among them, the new energy enterprises in the past three years the average annual sale income of not less than 100 million Yuan or annual net profit of not less than 10 million Yuan.

2. project application unit have a strong influence in the area, with the appropriate research and development infrastructure. Engineering Laboratory total no less than 20 people, including full-time research and development not less than 15 people. Field-related research and development equipment initial value of not less than 5 million Yuan, related to research and development space of not less than 500 square meters, the annual research and development spending on no less than 10 million Yuan or r is not less than 5% per cent sales, can provide key technology and equipment for industrial research, development, transfer, provide support and protection.

3. priority support enterprises, institutions, social organizations or institutions such as private non-enterprise joint filing in a cooperative manner.

(B) declare the project should meet the following conditions:

1. a clear positioning, development thinking, tasks, targets, reasonable, management system and operation mechanism norms;

2. project funds, proof of funds, Bank loan commitments issued by a financial institution (≥ projects with a total investment of own funds + Bank loans);

3. the project in line with State industrial policies and energy saving, energy, environmental protection, safety requirements, project plan feasible, has good social and economic benefits;

4. the project has been completed in accordance with the relevant provisions for filing or approval of, and time limits for more than two years, according to the project needs to be made, environmental impact assessment of land use, planning and other approval documents;

5. the upgrade plan, the project has been developed in the laboratory team, equipment and grounds on the basis of the implementation, and newly increased fixed assets investment (civil engineering, the acquisition of new equipment, etc).

6. Engineering Laboratory in Shenzhen (Shenzhen-Shantou special zone) construction, in principle not more than 3-year construction period.

Documents for applying for four, (subject to editing directory, pagination)

(A) application form

Declaration for the new energy industries projects and project basic information form (online after completing the print seal)

(B) the body of the project funding application

Reports should be written in the following format:

1. project summary

Include the project name, corporate profiles, construction site, construction, building size, construction, technology infrastructure, routes, and operation mode of projects, project implementation conditions, total investment in and financing of the project, analysis of the economic and social benefits of the project.

2. project basis, background and significance

3. technology development and its application prospects

Includes technical situation and development trend forecast and analysis, technology development, upper, middle and lower reaches of industry developments, key links and technical difficulties of the industry chain, projects in existing technology based, role and impact of the project on industrial development and market analysis.

4. the main direction, mission and objectives

Includes engineering labs to be breakthrough technology, main functions and tasks and short-term and medium-term objectives (control article I of this funding scheme to support new energy listed industry engineering labs main tasks in the field, and suggests some quantifiable indexes during the construction period).

5. the Organization, management and operation mechanism

Includes project legal person units, engineering laboratory organization and responsibilities, technical leader, Manager profiles and technical teams, as well as operation and management mechanism.

6. the building programme

Including content, size, location (including technical solutions, equipment and engineering programmes and its rationality) and content of project bidding.

7. energy saving and environmental impact

Including energy saving and environmental impact assessment, and so on.

8. project implementation and management

Including the construction period, the project implementation schedule and construction project management.

9. investment and funding programmes

Including, construction investment projects with a total investment estimated table estimates, annual investment plans, project financing and implementation and funding programmes.

Total investment of the project includes the construction and Initial working capital investment, research and development costs. Construction investment including equipment and hardware and software acquisition, installation, construction and other construction of fixed assets investment, and so on. Research and development expenses mainly include commissioned independent research and development costs and development costs. Which, independent development costs main including material fee, and test laboratory processing fee, and travel, and Conference fee, and international cooperation and Exchange fee, and published/literature/information spread/intellectual property fee, and labour, and experts advisory fee, and development personnel fee (not including financial dependent personnel of wage sex spending) and the indirect costs; delegate development costs main is refers to project units delegate outside units for research development by paid of costs. Initial working capital mainly includes fuel, raw material costs, rent lease, etc.

Project funding programmes, project construction investment of not less than a total investment of 40%, total research and development costs and Initial working capital does not exceed 60%; project financing schemes, including its own funds and bank loans, which the own funds required to provide supporting documents issued by the Bank.

Funding proposal is subject lists project required the acquisition of major equipment, technology and software list (type and quantity of equipment, reference price, whether purchased, whether the use of direct fiscal subsidy funds, and so on) as well as civil, liquidity, and so on.

10. analysis of the economic and social benefits of the project

Projects after the completion of the operation, management, economic and social benefits.

11. the project risk analysis

Including technical risk, market risk, financial risk evaluation and risk control.

12. other notes issues

(C) applications for project funding report

(1) the project legal registration, organization code certificate;

(2) the filing or approval of investment projects as well as energy-saving review (filing) views (in the construction area of the project development and reform Bureau, time limits for more than two years);

(3) project document of planning permission and land ownership certificate, renting space, please provide proof of rental;

(4) dealing with environmental impact, provide environmental impact assessment approval documents issued by the Environmental Protection Department;

(5) units in the last three years of the project financial audit report (if the project unit was established for less than three years, the financial audit report must provide the unit since its establishment);

(6) units in the last three years of investment in research and development in new energy special audit report (if the project unit was established for less than three years, must provide the unit since the establishment of the special audit report);

(7) required evidence of sufficient funds to implement the project (application deadline three months issued by a bank’s own capital deposit certificate files, loan commitment papers, signed loan agreements or contracts and other materials, 1 original);

(8) the description of the achievements of science and technology with independent intellectual property rights and relevant documents (certificate or notice of substantive examination of a patent for invention, including intellectual property rights);

(9) engineering laboratory technical team members and relevant supporting documents;

(10) the declared schedule of projects bidding in government subsidies (for details of the planned third);

(11) construction management commitment letter (format details of the planned fourth);

(12) the project has instrumentation equipment detailed list (format details of the planned fifth);

(13) the project new equipment/software acquisition list (format details of the planned sixth);

(14) joint venture, cooperation agreements should be provided;

(15) the applicant declared independent reporting and responsible for the authenticity of the submitted materials;

(16) other required materials.

In these materials, (1)-(15) must submit materials, and other submitted material can be supplemented according to the actual situation. These copies must be stamped with the company seal and checking the original, confidential material please indicate.

(D) subparagraphs (a), (b), (c) declarations of full electronic version (CD).

4, special municipal engineering laboratories enhance support (DSS)

A, main tasks

Core technology research of new energy industries and key technique of research, major equipment and key parts of the prototype development and industrialization of high-tech industry technology development, as well as research and industry technical standards, cultivate engineering innovative talents, promoting the application of major scientific and technological achievements, provide technical services for the industry.

Second, the support amount, method, amount and approval process

(A) number of support: there are quantitative restrictions, subject to special funds for the development of new energy industry annual total control.

(B) support: project funding project unit raised in principle, direct subsidies to support the Government. Grant funds to build 50% of the percentage of not less than the amount invested, for research and development costs less than 50%, and may not be used for other expenses.

(C) the amount of support: projects approved by the accredited a certain proportion of the total investment, financial support, not more than 5 million Yuan.

(D) the approval process: publishing guidelines-voluntary reporting-compliance review-peer-review-site visit-Department audited public-municipal government-issue plan.

Three, declare conditions

(A) the applicant shall comply with the following conditions:

1. approved the formation of Shenzhen municipal engineering lab, the lab has been accepted through the municipal development and Reform Commission of expert and project units there is a will in the original Engineering Laboratory, based on new investment to enhance.

2. municipal engineering and laboratory upgrading scheme in the laboratory has research and development team, equipment and grounds on the basis of the implementation. Team total of not less than 20 people, including full-time research and development not less than 15 people. Field-related research and development equipment initial value of not less than 5 million Yuan, related to research and development space of not less than 500 square meters, the annual research and development spending on no less than 10 million Yuan or r is not less than 5% per cent sales, can provide key technology and equipment for industrial research, development, transfer, provide support and protection.

(B) declare the project should meet the following conditions:

1. a clear positioning, development thinking, tasks, targets, reasonable, management system and operation mechanism norms;

2. project funds, proof of funds, Bank loan commitments issued by a financial institution (≥ projects with a total investment of own funds + Bank loans);

3. the project in line with State industrial policies and energy saving, energy, environmental protection, safety requirements, project plan feasible, has good social and economic benefits;

4. the project has been completed in accordance with the relevant provisions for filing or approval of, and time limits for more than two years, according to the project needs to be made, environmental impact assessment of land use, planning and other approval documents;

5. the upgrade plan, the project has been developed in the laboratory team, equipment and grounds on the basis of the implementation, and newly increased fixed assets investment (civil engineering, the acquisition of new equipment, etc).

6. Engineering Laboratory in Shenzhen (Shenzhen-Shantou special zone) construction, in principle not more than 3-year construction period.

Documents for applying for four, (subject to editing directory, pagination)

(A) application form

Declaration for the new energy industries projects and project basic information form (online after completing the print seal)

(B) the body of the project funding application

Reports should be written in the following format:

1. project summary (maximum 4000 words)

Project name, corporate profiles, based on, building grounds, development strategy and business plan, original engineering laboratory summary, next steps intended to upgrade programme of, contents, size, and location, the main construction conditions, conclusions and recommendations.

2. project basis, background and significance

Industrial development situation and trend forecasting, industrial development bottlenecks, engineering laboratories enhance construction on industrial development, the impact of structural adjustment, function and significance.

3. technology development and its application prospects

Technical situation and development trend analysis; technology development (including the technology advantages and weaknesses, key technology breakthrough).

4. the main direction, mission and objectives

Engineering laboratories enhance development strategies and ideas; the main direction of engineering laboratories enhance; engineering laboratories enhance the main tasks of engineering laboratories enhance short-and medium-term goals.

5. the Organization, management and operation mechanism

Project corporate units profile (units nature, and basic structure, and financial status, and operation situation, existing development conditions and research work based, in recent years made of related major research, and standard developed, and industrialization, results and level, in industry development in the of contribution, and effect and role situation,); institutions set and duties; main technology leader, and management personnel profile and the technology team situation; run and management mechanism.

6. the building programme

Construction, building size and construction sites (including technical solutions, equipment and engineering programmes, highlight the key common technology development, projects, etc).

7. energy saving and environmental impact

Energy-saving analysis of environmental impact assessment.

8. project implementation and management

Construction cycle; project implementation arrangements; project management during construction.

9. investment and funding programmes

Total project investment estimation table construction estimate; annual investment plans; project financing programme and its implementation; apply for government subsidies specific usage scenarios.

Total investment including investment and research and development costs. Construction investment main including construction fee, and equipment and the workers apparatus acquisition fee, and installation engineering fee and formed fixed assets of other construction investment,; development costs main including independent development fee and delegate development fee, which independent development fee main including material fee, and test laboratory processing fee, and travel, and Conference fee, and international cooperation and Exchange fee, and published/literature/information spread/intellectual property fee, and labour, and experts advisory fee, and development personnel fee (not including financial dependent personnel of wage sex spending) and the indirect costs, Commissioned development costs mainly refer to projects commissioned external research and development expenses to be paid by the unit. Project investment, construction investment total investment of not less than 20%, and research and development charges are not higher than 80%. Project financing schemes, including its own funds and bank loans, which the own funds required to provide supporting documents issued by the Bank.

Funding proposal is subject lists project required the acquisition of major equipment, technology and software list (type and quantity of equipment, reference price, whether purchased, whether the use of direct fiscal subsidy funds, and so on) as well as civil, liquidity, and so on.

10. analysis of the economic and social benefits of the project

Economic benefit analysis; social benefits.

11. the project risk analysis

Technology risk technology application and market risks other risks.

12. other notes issues

(C) applications for project funding report

(1) the project legal registration, organization code certificate;

(2) the filing or approval of investment projects as well as energy-saving review (filing) views (in the construction area of the project development and reform Bureau, time limits for more than two years);

(3) project document of planning permission and land ownership certificate, renting space, please provide proof of rental;

(4) dealing with environmental impact, provide environmental impact assessment approval documents issued by the Environmental Protection Department;

(5) units in the last three years of the project financial audit report (if the project unit was established for less than three years, the financial audit report must provide the unit since its establishment);

(6) units in the last three years of investment in research and development in new energy special audit report (if the project unit was established for less than three years, must provide the unit since the establishment of the special audit report);

(7) required evidence of sufficient funds to implement the project (application deadline three months issued by a bank’s own capital deposit certificate files, loan commitment papers, signed loan agreements or contracts and other materials, 1 original);

(8) the description of the achievements of science and technology with independent intellectual property rights and relevant documents (certificate or notice of substantive examination of a patent for invention, including intellectual property rights);

(9) engineering laboratory technical team members and relevant supporting documents;

(10) the declared schedule of projects bidding in government subsidies (for details of the planned third);

(11) construction management commitment letter (format details of the planned fourth);

(12) the project has instrumentation equipment detailed list (format details of the planned fifth);

(13) the project new equipment/software acquisition list (format details of the planned sixth);

(14) the form of approval and acceptance documents of municipal engineering laboratories;

(15) the applicant declared independent reporting and responsible for the authenticity of the submitted materials;

(16) other required materials.

In these materials, (1)-(15) must submit materials, and other submitted material can be supplemented according to the actual situation. These copies must be stamped with the company seal and checking the original, confidential material please indicate.

(D) subparagraphs (a), (b), (c) declarations of full electronic version (CD).

5, innovation capacity-building project (DSS)

First, the scope

On September 13, 2016 before the formal approval of the national development and Reform Commission National Enterprise Technology Center.

Second, the support amount, method, amount and approval process

(A) number of support: there are quantitative restrictions, subject to special funds for the development of new energy industry annual total control.

(B) support: project funding project unit raised in principle, direct subsidies to support the Government.

(C) the amount of support: projects approved by the accredited a certain proportion of the total investment, financial support, not more than 15 million Yuan (approved State-level Enterprise Technology Center and innovation, financial support, capacity-building projects funded and financed by the municipal Enterprise Technology Center, be subtracted from the total grants amounting to 15 million yuan). Funding for construction investment of no less than 50%, for research and development costs less than 50%, and may not be used for other expenses.

(D) the approval process: publishing guidelines-voluntary reporting-compliance review-peer-review-site visit-Department audited public-municipal government-issue plan.

Three, declare conditions

(A) in the city of Shenzhen (Shenzhen-Shantou zone) registration, have independent legal personality of the new energy and industrial development, production and service enterprises. Enterprise has a strong economic and technological strength and good economic benefits, has a significant size advantage in new energy industries and competitive advantages.

(B) the applicant before September 13, 2016 approved the formation of the State Enterprise Technology Center.

(C) project in Shenzhen (Shenzhen-Shantou special zone) implementation;

(D) project application unit have a strong influence in the area, and has a comprehensive research, development, test, there is a strong technology innovation capability and higher research and development investment, core technologies with independent intellectual property rights and famous brands, and international competitiveness, research and development and innovation in the leading position in the industry. Have a high technical level, experienced technology leader, has a certain amount of technical personnel in the industry with strong creative talent. Enterprise’s annual sales income is not less than 100 million Yuan, r is not less than 15 million Yuan or r is not less than 5% per cent sales, full-time research and development personnel in enterprises of not less than 150 members, enterprise technology development instrument the original value is not less than 20 million Yuan, can provide key technology and equipment for industrial research, development, transfer, provide support and protection.

(V) innovation capacity-building projects targeted to develop clear, tasks, targets, reasonable, management system and operation mechanism specification. Newly increased fixed assets investment (civil engineering, the acquisition of new equipment), construction period is generally not more than 3 years.

(F) the project conforms to national industrial policies and energy-efficient, energy, environmental protection, safety requirements, project plan feasible, has good social and economic benefits.

(G) project has been completed in accordance with the relevant provisions and approval, filing or approval of, and time limits for more than two years, according to the project needs to be made, such as land use, environmental impact assessment, planning documents of ratification.

Documents for applying for four,

(A) application form

Declaration for the new energy industries projects and project basic information form (online after completing the print seal)

(B) the project funding application (subject to editing table of contents, pagination)

Reports should be written in the following format:

1, the project summary (maximum 4000 words)

Project name, corporate profiles, based on, building grounds, development strategy and business plan, programme of construction, size, and location, main construction conditions, access to the results, conclusions and recommendations.

2, basis, background and significance of project construction

Related industrial development situation and trend forecasting (including domestic and foreign technical situation and development trend analysis, key technology breakthrough the technology advantages and disadvantages,) and the bottlenecks in the development of industry, enterprises innovation capacity-building projects for breakthrough in key technologies, carry out forward-looking research and development support, to promote industry technology progress.

3, the main direction, mission and objectives

Enterprise development strategies and ideas; the main development direction; the main task; near-and mid-term objectives (specific to the acceptance criteria and indicators).

4, organization, management and operation mechanism

(1) survey of corporate units (unit, basic structure, financial position, operations, and research work based on existing research and development conditions in recent years made significant scientific research, standards development, industrialization and levels of achievement, contribution, influence and role in the industry);

(2) Organization and responsibilities;

(3) the technical survey of leaders, managers and technical teams;

(4) operation and management mechanism.

5, the construction programme

Construction, building size and construction sites (including technical solutions, equipment and engineering programmes, highlight the key common technology development, project bidding).

6, energy saving and environmental impact

7, project implementation and management

Construction period, the project implementation schedule, construction project management.

8, investment and financing programme

Total project investment estimation table, construction investment, investment plans, project financing scheme and its implementation, application specific schemes of the Government subsidies.

Total investment of the project includes the construction and Initial working capital investment, research and development costs. Construction investments include construction costs, installation costs, and purchase, renovation and lease costs of equipment (including the acquisition of the necessary technical and software), equipment manufacture. Research and development expenses, including commissioned independent research and development costs and development costs. Which, independent development fee main including material fee, and test laboratory processing fee, and travel, and Conference fee, and international cooperation and Exchange fee, and published/literature/information spread/intellectual property fee, and experts advisory fee, and labour, and development personnel performance spending (not including financial dependent personnel of wage sex spending),; delegate development fee main is refers to project units purchase development outsourcing service by paid of costs. Initial working capital including fuel, raw material costs, space rental fees, preparation fees, infrastructure interest rates.

Project investment, construction investment total investment of not less than 40%, research and development costs and Initial working capital total less than 60%.

9, economic and social benefits

10, project risk analysis

Including technical risk, technology application and market risks and other risks.

11, other notes issues

12, related accessories

(1) the project legal registration, organization code certificate;

(2) State and municipal Enterprise Technology Center approval documents and released State and municipal fiscal approval documents;

(3) the filing or approval of investment projects as well as energy-saving review (filing) views (in the construction area of the project development and reform Bureau, time limits for more than two years);

(4) project document of planning permission and land ownership certificate, renting space, please provide proof of rental;

(5) dealing with environmental impact, provide environmental impact assessment approval documents issued by the Environmental Protection Department;

(6) units in the last three years of the project financial audit report (if the project unit was established for less than three years, the financial audit report must provide the unit since its establishment);

(7) units in the last three years of investment in research and development of special audit report of the project (project unit was established for less than three years, must provide the unit since the establishment of the special audit report);

(8) evidence of sufficient funds required for project implementation (application deadline three months issued by a bank’s own capital deposit certificate files, loan commitment papers, signed loan agreements or contracts and other materials, 1 original);

(9) the description of the achievements of science and technology with independent intellectual property rights and relevant documents (certificate or notice of substantive examination of a patent for invention, including intellectual property rights);

(10) the project technical team members and relevant supporting documents;

(11) reporting project schedule of bidding in government subsidies (for details of the planned third);

(12) the project management commitment letter (format details of the planned fourth);

(13) the project has instrumentation equipment detailed list (format details of the planned fifth);

(14) the project new equipment/software acquisition list (format details of the planned sixth);

(15) the applicant declared independent reporting and responsible for the authenticity of the submitted materials;

(16) other required materials.

In these materials, (1)-(15) must submit materials, and other submitted material can be supplemented according to the actual situation. These copies must be stamped with the company seal and checking the original, confidential material please indicate.

(C) subparagraphs (a), (b) the declarations of full electronic version (CD).

Three, using Government grants auction schedule


Special funds for the development of new energy industry 2016 fourth support program

Fill in the description:

1, in tender declaration spaces, according to actual demand, “v”, described the bidding at the description and reason and affix its official seal.

2, in accordance with the relevant requirements, Government grant money should be used for equipment and hardware and software acquisition and tender.

Four letters of commitment, project construction and management


Special funds for the development of new energy industry 2016 fourth support program

Special funds for the development of new energy industry 2016 fourth support program

Special funds for the development of new energy industry 2016 fourth support program

Original title: Shenzhen City, Shenzhen City development and Reform Commission on organization and implementation of new energy industry development fund 2016 fourth support program notifications

Posted in Solar Charger.